Creating a Windows 10 USB Install Drive

  • Add your model to DARequiredROMVersions
  • Delete the word “Pre” from UEFIModels and add your model
  • Delete the word “Pre” from USBBootSupportedModels and add your model
  • Remove your model from Win7OnlyModels (if its there)

Method One: Do it from Windows 10

Do it from Windows 10 — download the Windows Media Creation Tool and use it to create the USB install image.

Method Two: Bootcamp Assistant

From Bootcamp Assistant, if you’re lucky.

If you have a Mac the supports Windows 10 and doesn’t have a super drive built into it, this should be a piece of cake.

  1. Download the Windows 10 ISO image — currently the image to get is the Windows 10 Anniversary Update. There are three versions listed:
    – Windows 10
    – Windows 10 N
    – Windows 10 single language

I believe I have selected both “Windows 10” and “Windows 10 single language” at different iterations of this project. Pick your poison.

2. Plug the USB drive you want to use for the Windows Installer into your Mac. Kiss any data on it bye bye.

3. Go to Application->Utilities in the Finder and launch Bootcamp Assistant

4. Hit Continue

5. For now, just select “Create a Windows 7 or later install disk” and hit Continue


6. Bootcamp is really good about automatically finding the Windows ISO image, but make sure that it’s preparing to zot the correct USB drive if you have more than one connected to your Mac.

7. Hit Continue one last time and let nature take its course.

Method Three: Plist Hacking

The 5.1 Mac Pros come with a built-in superdrive, so it will not provide you with a USB drive option (for the love of god WHY NOT?). It’s also not a supported platform, so it won’t let you create a Windows 10 installer…because you might turn around and use that very Mac.



This requires you to modify Bootcamp Assistant’s Info.plist file a little. I’m a coward, so I duplicated Bootcamp Assistant first and then did all of my work with Bootcamp Assistant Copy, which I renamed Bootcamp Assistant hacked.

  1. Right click on Bootcamp Assistant Hacked and select Show Package Contents

2. Double click on Contents to open it

3. Right click on Info.plist and select Open With->TextEdit or use your text editor of choice.

4. Add the following lines, shown in green below.


5. Remove the -MacPro5,1 -line from the PreUSBBootSupportedModels array.

6. Add the following line to the PreWindows10OnlyModels array block: <string>MacPro5,1</string>

7. Remove the <string>MacPro5,1</string> line from the end of the “SupporedNonWin10Models” (sic) array block.

8. Save the file. Close the Finder window. Go wash your hands a couple of times.

9. Now go back to Applications->Utilities in the Finder and double click on your hacked copy of Bootcamp Assistant.


************************************************CTR+ R *****************

Warning: The point of SIP is to prevent malware and other unwanted modifications into system files. Consider whether or not you want to dispense with this protection.

For the following to work, you must have a proper and up to date Recovery partition on your boot drive. While that should be a given, it’s possible to clone a startup volume without Recovery installed.

rootless launch recovery terminal
From the Utilities menu in Recovery select Terminal.
rootless terminal command recovery
Use the Terminal in Recovery to enter the SIP-disabling command.

Follow these steps to disable SIP:

  1. Restart your Mac.
  2. Before OS X starts up, hold down Command-R and keep it held down until you see an Apple icon and a progress bar. Release. This boots you into Recovery.
  3. From the Utilities menu, select Terminal.
  4. At the prompt type exactly the following and then press Return: csrutil disable  - AFTER ENBALES FINESH 
  5. Terminal should display a message that SIP was disabled.
  6. From the  menu, select Restart.

You can re-enable SIP by following the above steps, but using csrutil enable instead.